| Lot | | Description |
| 1 | | 20-TON H-PRESS |
| 2 | | 20-TON H-PRESS |
| 3 | | CONSTRUCTION LIGHTS AND EXTENSION CORDS |
| 4 | | RANSOM REST |
| 5 | 3 | BESSEY, IRWIN & COLUMBIAN BENCH VISES |
| 6 | | LOT OF (11) ASSORTED AIR HOSES |
| 7 | | COLEMAN 150 COOLER, ASSORTED RADIOS AND MAG LIGHT |
| 8 | | ARBOR PRESS |
| 9 | | ARBOR PRESS |
| 10 | | ARBOR PRESS |
| 11 | | ARBOR PRESS |
| 12 | | LOT OF (7) ASSORTED 4, 6 & 8" C-CLAMPS |
| 13 | | SKIL 9295 ANGLE GRINDER & SKILSAW |
| 14 | 4 | HEAT GUN & (3) ASSORTED DRILLS |
| 15 | | DEWALT DCD710 DRILL AND ASSORTED ACCESSORIES |
| 16 | | LOT OF ASSORTED HAND TOOLS |
| 17 | | PROTO TORQUE WRENCH |
| 18 | | TRILITE DDH DRUM DEHEADER |
| 19 | | STARRETT CRYSTAL PINK 12"x18"x4" SURFACE PLATE |
| 20 | 3 | TAIL STOCKS |
| 21 | | TOOL GRINDER |
| 22 | | LOT OF SAND PAPER, SCOTCH PADS, AND MISC ON (2) SHELVES |
| 23 | | MISC ON (6) SHELVES |
| 24 | | PAINT SPRAYER, FILTER/REGULATOR/LUBRICATOR AND MISC |
| 25 | | CAULK GUNS, CLAMPS, TORCHES, FASTENERS ON (2) SHELVES |
| 26 | | BITS AND MISC ON (3) SHELVES |
| 27 | 4 | AIR HAMMERS AND IMPACT WRENCHES |
| 28 | 4 | AIR DRILLS (RED) |
| 29 | 6 | PNEUMATIC DIE GRINDERS |
| 30 | | (4) PNEUMATIC TOOLS AND PNEUMATIC ACCESSORIES |
| 31 | | LOT OF 3M 237AA TRIZACT ABRASIVE BELTS |
| 32 | | LOCK-OUT BAGS AND MISC ON (2) SHELVES |
| 33 | | JUSTRITE 40 GALLON FLAMMABLE CABINET AND CONTENTS |
| 34 | | ULINE JCE-15K 30LB DIGITAL SCALE |
| 35 | 5 | METAL PARTS SHELVING: 36"x24"x85"H |
| 36 | | BALTEC ECOLINE EN20 PNEUMATIC RIVETING MACHINE, S/N: 20.0007 |
| 37 | | BRACKER AG RN101 RIVETING MACHINE, S/N: 10557 |
| 38 | | ARBOR PRESS |
| 39 | | ARBOR PRESS |
| 40 | | ARBOR PRESS |
| 41 | | ARBOR PRESS |
| 42 | | RYOBI 6" BENCH GRINDER |
| 43 | | DELTA 31-140 DISC GRINDER |
| 44 | | BURRKING BELT SANDER, BK26563 |
| 45 | | DENRAY 2872BGF DOWN DRAFT TABLE, S/N: 467895 |
| 46 | | ENCO 00233551 DUST COLLECTOR |
| 47 | | 1984 MILLPORT 2S VERTICAL MILLING MACHINE S/N: 85116S, 2HP, 3PH, 42"x9" T-SLOT TABLE, AL-400S POWER FEED, ANILAM SPIRIT DRO |
| 48 | | BRIDGEPORT VERTICAL MILLING MACHINE S/N: 174408, 1.5HP, 3PH, 42"x9" T-SLOT TABLE, BRIDGEPORT POWER FEE, ACU-RITE MILLMATE DRO |
| 49 | | 2012 STANDARD TOOLS IPB-1000-PC PAINT BOOTH 13'x10'x86"H, DAYTON 3C411B EXHAUST FAN (REQUIRES FIRE SUPRESSION DISCONNECT & PATCH EXTERIOR HOLE) |
| 50 | | 2012 STANDARD TOOLS IPB-1000 PAINT BOOTH 13'x10'x86"H, DAYTON 3C411B EXHAUST FAN (REQUIRES FIRE SUPRESSION DISCONNECT) |
| 51 | 5 | MATERIAL CARTS |
| 52 | | (3) WORK BENCHES, (2) BENCH VISES AND MISC |
| 53 | 2 | METAL FRAMED WORK BENCHES: 63"x33"x40"H |
| 54 | | METAL FRAMED WORK BENCH: 16'3"x49"x32"H |
| 55 | 2 | METAL FRAMED WORK BENCHES: 4'x8'x32"H |
| 56 | 3 | WORK BENCHES: 3'x5'x33"H |
| 57 | 2 | WORK BENCHES: 3'x8'x30"H |
| 58 | 2 | WORK BENCHES: 3'x8'x36"H |
| 59 | 10 | SECTIONS OF PARTS SHELVING: 48"x24"x6'H |
| 60 | | LOT OF DRY ERASE BOARD, PART SHELVING, & PAPER FILES |
| 61 | | LOT OF SHIPPING BOXES & BUBBLE WRAP |
| 62 | | IMPULSE AIE 400P HEAT SEALER |
| 63 | 2 | IMI DSC425-120 & PHASE II DEMAGNETIZERS |
| 64 | | LOT OF POLY TUBING AND SHRINK WRAPPING |
| 65 | | CARTON STAPLER, PAPER DISPENSER AND MISC |
| 66 | | LOT OF (15) TAPE DISPENERS & (10) BUNDLES OF TAPE |
| 67 | | GARMENT RACK |
| 67A | | OFFICE SUPPLY LOT |
| 67B | | 3M MODEL: 1608AJA OVERHEAD PROJECTOR |
| 67C | | SHARP XR-10S PROJECTOR |
| 67D | | POLYCOM SOUNDSTATION EX |
| 67E | | HP PRINTER, CANON SCANNER & MISCELLANEOUS |
| 67F | | COMPACT REFRIGERATOR, CABINET, FOLDING TABLE |
| 68 | | DELL DIMENSION 5150 CPU, HP PHOTOSMART C3180 & BROTHER MFC-5890CN PRINTERS |
| 69 | | WOOD DOUBLE PEDESTAL DESK, FAN, AND HEATERS |
| 70 | 2 | SWIVEL OFFICE CHAIRS |
| 71 | 8 | SWIVEL SHOP CHAIRS |
| 72 | | CM SHOP STAR 600LB HOIST |
| 73 | | BANDING CART AND TOOLING |
| 74 | | BANDING CART AND TOOLING |
| 75 | | METAL SHOP BENCH: 48"x24"x32"H |
| 76 | | JET JPSB-618M SURFACE GRINDER S/N: 1020060, SUBURBAN TOOL MCB-618 MAGNETIC CHUCK, ACCURITE DRO |
| 77 | | LOT OF ASSORTED GRINDING WHEELS, MISC AND STORAGE CABINET |
| 78 | 3 | 3'x5' ANTI-FATIQUE MATS |
| 79 | | CONTENTS OF MAINTENANCE CRIB |
| 80 | | LOT OF ASSORTED SLINGS |
| 81 | | DURHAM 72-BIN PARTS DRAWER AND CONTENTS (SET SCREWS, LOCK WASHER, HEX NUTS, ETC) |
| 82 | | HANGING PARTS BINS WITH COLLETS AND DRILL BITS |
| 83 | | PARTS BIN RACK WITH SANDPAPER AND ASSORTED TOOLING |
| 84 | | METAL SHOP STAND: 34"x25"x37"H |
| 85 | 4 | SECURITY CRIBS: 10'x10'x8'H CRIBS WITH 46" DOOR |
| 86 | | MSC 16-50G GAP BED LATHE, S/N: 1JP0197, ANILAM PATRIOT DRO, 3-JAW CHUCK, TAIL STOCK, STEADY REST, TOOL POST, ROYAL PRODUCTS CHUCKER |
| 87 | | LOT OF LATHE TOOLING, BAR GAUGES, AND CABINETS |
| 88 | | BRIDGEPORT SERIES I 2HP VERTICAL MILLING MACHINE S/N: 217166, MITUTOYO GML-3705DRO, 9"x42" AL-400S POWER FEED T-SLOT TABLE, COLLETS |
| 89 | | LOT OF COLLETS AND COLLET HOLDERS |
| 90 | | COVEL 8"x24" HYDRAULIC SURFACE GRINDER S/N: 35A-1101, MAGNA-LOC 8"x24" MAGNETIC CHUCK, O.S. WALKER CHUCK CONTROL |
| 91 | | OKAMOTO ACCUGAR 124 12"x24" HYDRAULIC SURFACE GRINDER, S/N: 7164 |
| 92 | | 1942 NORTON 6"x18" CYLINDRICAL GRINDER, S/N: 18119 |
| 93 | | SUNNEN MBB-1600 PRECISION HONING MACHINE, 1PH, S/N: 41232 |
| 94 | | CINCINNATI GPCA 3HP, 3PH PEDESTAL GRINDER |
| 95 | | RIKEN SOKUHAN BENCH CENTER, BAR GAUGES AND MISC |
| 96 | | METAL WORK BENCH: 30"x5'x36"H AND 4'x48"x35"H PARTS SHELVING |
| 97 | | KALAMAZOO 3/4HP 1PH HORIZONTAL BAND SAW |
| 98 | | UNITED STATES MACHINE TOOL COMPANY MODEL 1 ARBOR MILL, 1PH, S/N: 10343R |
| 99 | 3 | WET/DRY VACS AND ACCESSORIES |
| 100 | | PARTS WASHER & 2-DRAWER SHOP BENCH |
| 101 | | PEDESTAL BELT SANDER, 1/3HP, 1PH WITH RIDGID VAC |
| 102 | | PEDESTAL BELT SANDER, 1/3HP, 1PH |
| 103 | | RYOBI 6" [EDESTAL BENCH GRINDER |
| 104 | | PORTER CABLE BENCH GRINDER WITH RIDGID VAC & WORK BENCH: 5'x2'x35" |
| 105 | | DELTA 3PH DRILL PRESS WITH GIBRALTAR VISE & DRILL STATION BENCH: 29"x8'x32"H |
| 106 | | CONTINENTAL ENGINE HOIST |
| 107 | 3 | FLOOR FANS |
| 108 | 3 | MAXX AIR FLOOR FANS |
| 109 | | LOT OF (5) FANS |
| 110 | | LINCOLN ELECTRIC WELD-PAK 125HD WELDER |
| 111 | | WELDING MASKS, SHIELDS, GLOVES, & ROD |
| 112 | | ACETYLENE CART, TORCH, HOSE, & GAUGES |
| 113 | | SAFETY HARNESS, LANYARD, FALL ARREST AND (2) BELTS |
| 114 | 22 | FLEX-HONE TOOLS |
| 115 | | DRILL DOCTOR AND SOLDERING KIT |
| 116 | | PUMP, MEASURING TAPE, & SNAKE |
| 117 | | LOT OF O-RING KITS |
| 118 | | LOT OF PIN GAUGES |
| 119 | | NSK PKW-WZ13B78-33ZTEA 12K LONGER SPINDLE W/ CERAM |
| 120 | | JET J-2530 15" BENCHTOP DRILL PRESS, S/N: 354401 |
| 121 | | LOT OF DRILL BITS AND PUNCHES |
| 122 | | STRAPS, CHAIN, COME-A-LONG AND CLEVIS |
| 123 | | BESSEY BENCH VISE AND WOOD BENCH: 41"x89"x 35"H |
| 124 | | LOT OF ASSORTED HOSES |
| 125 | | SHOP BENCH: 74"x38"x32"H |
| 126 | | FLOOR CREEPER, SAFETY CONES, & SCOTTS SPREADER |
| 127 | | 2008 FANUC ROBOCUT WIRE EDM ALPHA 1i-D12-MED, TYPE: A04B-0320-B001, #D5, S/N: P083D1435, FANUC SERIES 310is-WA CONTROL PANEL, |
| 128 | | 2012 JOHNFORD SL300 CNC 2-AXIS TURNING CENTER FANUC OI-TD, SWING OVER BED: 15.7", MAX TURNING DIAMETER: 12.99", CENTER DISTANCE: 24", 2.05" BAR, TURRET STATIONS: 12, WEIGHT: 8,800LBS., S/N: TED12072 |
| 129 | | 2011 JOHNFORD SL500+CS CNC LATHE SWING OVER BED: 22.8", SWING OVER CROSS STDDE: 17.7", CENTER DISTANCE: 31", S/N: TEN11116 |
| 130 | | 2008 YCM GT300MA, CNC TURNING CENTER MAX SWING: 23.6", TURNING DIAMETER: 9.04", CENTER DISTANCE: 19.9", TURRET STATIONS: 12, WEIGHT: 9,392LBS. S/N: 0030 |
| 131 | | 2010 ECOCA SJ-20 20HP 2-AXIS, UNIVERSAL CNC LATHE MAX SWING: 18.50, TURNING DIAMETER MAX: 9.80, LENGTH: 14.645, WEIGHT: 10,340 LBS., S/N: 7903217 |
| 132 | | 2001 HAAS SL30T, 2-AXIS, SLANT BED CNC LATHE MAX SWING OVER APRON: 30", MAX TURNING DIAMETER 17", LENGTH: 34", CENTER DISTANCE: 39", 2.5" BAR, TURRET STATIONS: 12, WEIGHT: 16,000LBS. S/N: 84074 |
| 133 | | HYUNDAI KIA SKT 21 HORIZONTAL TURNING CENTER, S/N: SKT211506 |
| 134 | | MORI-SEIKI SL-3H CNC LATHE 10" CHECK, 2.5" BAR, 24" BETWEEN CENTERS, 4000 RPM SPINDLE |
| 135 | | 2010 AVEREX AKARI SIEKI HS-450I HORIZONTAL MACHINING CENTER FANUC 31I-MODEL A MOTOR CONTROL, 120 AUTOMATIC TOOL CHANGER, 2 PALLET, S/N: 991005 |
| 136 | | 2010 AVEREX AKARI SIEKI HS-450I HORIZONTAL MACHINING CENTER FANUC 31I-MODEL A MOTOR CONTROL, 80 AUTOMATIC TOOL CHANGER, 2 PALLET, S/N: 991018 |
| 137 | | CHICK MULIT-LOK WORKHOLDING PALLET (IN LOT 135) (PALLET ONLY) |
| 138 | | CHICK MULIT-LOK WORKHOLDING PALLET (IN LOT 135) (PALLET ONLY) |
| 139 | | CHICK MULIT-LOK WORKHOLDING PALLET (IN LOT 136) (PALLET ONLY) |
| 140 | | CHICK MULIT-LOK WORKHOLDING PALLET (IN LOT 136) (PALLET ONLY) |
| 141 | | 2007 KIWA KH-45 60 ATC WITH STANDARD FANUC 32I FEATURES, S/N: JB4652 |
| 142 | | 2007 KIWA KH-45 60 ATC WITH STANDARD FANUC 32I FEATURES, S/N: JB4638 |
| 143 | | KIWA KNH-426X HORIZONTAL MACHINING CENTER 120 AUTOMATIC TOOL CHANGER - 2 PALLET, 12000 RPM SPINDLE WITH FANUC 18IM CONTROL, S/N: JK7721 |
| 144 | | 2003 KIWA KNH 400 HORIZONTAL MACHINING CENTER 64 AUTOMATIC TOOL CHANGER - 2 PALLET, 100000 RPM SPINDLE W/ FANUC 18IMB CONTROL, T18 MARPOSS TOOL SETTER, S/N: PB7192R |
| 145 | | MACHINE PALLET (IN LOT 141) (PALLET ONLY) |
| 146 | | MACHINE PALLET (IN LOT 141) (PALLET ONLY) |
| 147 | | LEAVE TOMBSTONE CITY (IN LOT 142) (PALLET ONLY) |
| 148 | | LEAVE TOMBSTONE CITY (IN LOT 142) (PALLET ONLY) |
| 149 | | CHICK MULTI-LOK WORKHOLDING PALLET (IN LOT 149) (PALLET ONLY) |
| 150 | | CHICK MULTI-LOK WORKHOLDING PALLET (IN LOT 149) (PALLET ONLY) |
| 151 | | CHICK MULTI-LOK WORKHOLDING PALLET (IN LOT 150) (PALLET ONLY) |
| 152 | | CHICK MULTI-LOK WORKHOLDING PALLET (IN LOT 150) (PALLET ONLY) |
| 153 | | 2001 HAAS VF3B VERTICAL MACHINING CENTER 21 X 24 X 41.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 15 HP SPINDLE |
| 154 | | HAAS PROGRAMMABLE 4TH AXIS |
| 155 | | YCM SUPERMAX MV76A VERTICAL MACHINING CENTER 20 X 30 X 20 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER - PROGRAMMABLE 4TH AXIS ROTARY TABLE, 8000 RPM SPINDLE, 20 HP SPINDLE WITH FANUC MCP100I CONTROL AND SMWRT 175 INDEXER, S/N: 311057 |
| 156 | | YCM SUPERMAX TCV-51A VERTICAL MACHINING CENTER 2 PALLET, 10000 RPM SPINDLE FANUC 18 CONTROL, 30 AUTOMATIC TOOL CHANGER WITH MXP100I CONTROL, S/N: 405009 |
| 157 | | 2005 YCM SUPERMAX XV1020A MACHINING CENTER 24 TOOL SWING ARM ATC 30 HP, 100 SPINDLE THK@R LINEAR GUIDE, RIGID TAPPING, S/N: 1067 |
| 158 | | YCM SUPERMAX XV1020A MACHINING CENTER 24 TOOL SWING ARM ATC 30 HP, 100 SPINDLE THK@R LINEAR GUIDE, RIGID TAPPING, S/N: 05010849 |
| 159 | | 2012 YUASA UDNC-M1/5Y3-603697-10X CONTROLLER W/ MODEL: 512019 4TH AXIS ROTARY TABLE (IN LOT 158) |
| 160 | | YCM SUPERMAX XV560A, VERTICAL MACHINING CENTER 10,000 RPM 20 TOOL SWING ARM 25/30 HP IDD SPINDLE, S/N: 412623 |
| 161 | | 2008 SUPERMAX MV106A VERTICAL MACHINING CENTER 20 X 30 X 20 TABLE TRAVEL, 30 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 20 HP SPINDLE WITH FANUC MXP200I CONTROL, S/N: 1582 |
| 162 | | SUPERMAX FV-102A VERTICAL MACHINING CENTER FANUC 18-MC CONTROLS, 20 X 40 X 20 TABLE TRAVEL, 10000 RPM SPINDLE, 24 TOOL CAROUSEL, 20 HP SPINDLE, S/N: 010200 |
| 163 | | 2012 YUASA UDNC-M1/5Y3-603697-10X CONTROLLER WITH MODEL: 510026 4TH AXIS ROTARY TABLE (IN LOT 162) |
| 164 | | YUASA UDDNC-M1/5Y3-603697-10X CONTROLLER (NOT IN SERVICE) |
| 165 | | 2009 JOHNFORD SV 40 SUPER VERTICAL MACHINING CENTER, 2500 - 8000 RPM, 41.3 X 20 X 24 TABLE TRAVEL, 15 HP, 24 ATC, S/N: MLB9483 |
| 166 | | 2004 JOHNFORD SV-40 SUPER VERTICAL MACHINING CENTER FANUC SERIES OI-MB, 21 X 24 X 41.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 15 HP SPINDLE, 2 SPEED GERMAN ZP PLANETARY GEAR BOX, S/N: MLB4314 |
| 167 | | 2005 JOHNFORD SV-40 SUPER VERTICAL MACHINING CENTER FANUC SERIES OI-MC, 21 X 24 X 41.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 15 HP SPINDLE, 2-SPEED GERMAN ZP PLANETARY GEAR BOX, S/N: MLB5338 |
| 168 | | 2007 JOHNFORD SV-40 SUPER VERTICAL MACHINING CENTER FANUC SERIES OI-MC, 21 X 24 X 41.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 15 HP SPINDLE, 2 SPEED GERMAN ZP PLANETARY GEAR BOX, S/N: MLB7419 |
| 169 | | 2004 JOHNFORD SV-40 SUPER VERTICAL MACHINING CENTER FANUC SERIES OI-MB, 21 X 24 X 41.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 15 HP SPINDLE, 2 SPEED GERMAN ZP PLANETARY GEAR BOX, S/N: MLB4324 |
| 170 | | JOHNFORD SV-45 VERTICAL MACHINING CENTER 21 X 25.2 X 45.3 TABLE TRAVEL, 24 AUTOMATIC TOOL CHANGER, 8000 RPM SPINDLE, 20 HP SPINDLE, S/N: VN3227 |
| 171 | | 2007 TWINHORN VH1010 VERTICAL MACHINING CENTER, 15HP 3-AXIS, 47L X 18W TABLE , S/N: V0706290 |
| 172 | | YUASA UDNC-M1/5Y3-603697-10X CONTROLLER W/ 4TH AXIS ROTARY TABLE (IN LOT 171) |
| 173 | | 2006 TWINHORN VA500 VERTICAL MACHINING CENTER 16 TOOL, 10HP, 3-AXIS, 28L X 16W TABLE, S/N: V0601031 |
| 174 | | 2006 TWINHORN VA500 VERTICAL MACHINING CENTER 16 TOOL, 10HP, 3-AXIS, 28L X 16W TABLE, S/N: V0602042 |
| 175 | | 2007 TWINHORN VA500 VERTICAL MACHINING CENTER 16 TOOL, 10HP, 3-AXIS, 28L X 16W TABLE, S/N: V0602062 |
| 176 | | 2005 TWINHORN VA500 VERTICAL MACHINING CENTER 16 TOOL, 10HP, 3-AXIS, 28L X 16W TABLE, S/N: V0412713 |
| 177 | | 2008 TWINHORN VA500 VERTICAL MACHINING CENTER 16 TOOL, 10HP, 3-AXIS, 28L X 16W TABLE, S/N: V0710484 |
| 178 | | 1994 YCI SUPERMAX MAX 1-REBEL MACHINING CENTER, S/N: 409010 |
| 179 | | 2006 CAMPRO CSP-1100I W/ FANUC OIMC CONTROL & STANDARD FEATURES 24 TOOL DOUBLE ARM ATC, 20 HP - 8000 RPM SPINDLE, S/N: MCA-097 |
| 180 | | 2007 CAMPRO CSP-550I VERTICAL MACHINING CENTER 15HP, 3-AXIS, 22L X 17W TABLE S/N: MVAA-027 |
| 181 | | 1985 ACROMAX MX-16 MACHINING CENTER S/N: 01105, 24 X 16 X 20 MILLING CUBE, 16 TOOL CAROUSEL - PROGRAMMABLE 4TH AXIS ROTARY TABLE |
| 182 | | 1988 YCI SUPERMAX MAX-1 VERTICAL MACHINING CENTER 24 X 16 X 20, 16-TOOL CAROUSEL, S/N: 11316 |
| 183 | | 1987 YCI SUPERMAX YCM-VNC-60 VERTICAL MACHINING CENTER 24 X 16 X 20 TABLE, 16-TOOL CAROUSEL, S/N: 10290 |
| 184 | | 2001 RAM 3V11 VERTICAL MILLING MACHINE S/N: 10657, ANILAM 3000M DRO, 10"x50" T-SLOT TABLE |
| 185 | | BRIDGEPORT 1HP, 3PH VERTICAL MILLING MACHINE S/N: BR66650, SARGON DRO, 9"x36" T-SLOT TABLE, QUILL ATTACHMENT |
| 186 | | BROWN & SHARPE 3B PLAIN STANDARD TYPE HORIZ MILLING MACHINE |
| 187 | | KYSOR JOHNSON KV-36 BAND SAW |
| 188 | | LOT OF BANDSAW BLADES |
| 189 | | HYSTER H50FT FORKLIFT 989 HOURS, S/N: L177B02079C 5,000LB. CAPACITY, 189" 3-STAGE MAST, 42" CARRIAGE, 48" FORK TINES, LP FUEL |
| 190 | | CATERPILLAR GC15K FORKLIFT 3,886 HOURS, S/N: AT81C-02579, 3,000LB. CAPACITY, SIDE SHIFT, 188" 3-STAGE MAST, 48" FORK TINES, LP FUEL |
| 191 | | 2009 CHEVROLET EXPRESS 2500 CARGO VAN MILES: 222,955, S/N: 1GCGG25C391140902, 4.8-LITER V8, AUTOMATIC |
| 192 | | 2002 CHEVROLET G3500 EXPRESS CUTAWAY VAN MILES: 129,176, S/N: 1GBJG31R421106421, 5.7-LITER V8, AUTOMATIC, VAN BODY W/ ATTIC OVER THE CAB |
| 193 | | JET 6,000LB PALLET JACK |
| 194 | | CE 5,5000LB PALLET JACK |
| 195 | 2 | TWO-WHEEL DOLLIES |
| 196 | | AKARI SEIKI HMC HS-450i CIRCUIT BOARD |
| 197 | | ASSORTED CARBIDE REAMERS AND BITS |
| 198 | | LOT OF COOLANT HOSE & ACCESSORIES |
| 199 | | LOT OF ASSORTED COLLETS |
| 200 | 34 | INDEXABLE TOOLING |
| 201 | | LOT OF END MILLS & BURR TIPS |
| 202 | | LOT OF CARBIDE JOBBER DRILL BITS |
| 203 | | LOT OF PARABOLIC DRILL BITS |
| 204 | | LOT OF CARBIDE REAMERS |
| 205 | | LOT OF MILLING DRILL INSERTS |
| 206 | | LOT OF ASSORTED TAPS |
| 207 | | LOT OF HSS REAMERS |
| 208 | | LOT OF SAWS |
| 209 | | LOT OF HSS WOODRUFFS |
| 210 | | LOT OF CARBIDE WOODRUFFS |
| 211 | | LOT OF INDEXABLE SAW INSERTS |
| 212 | | LOT OF CORNER ROUNDERS |
| 213 | | LOT OF CHAMFER MILLS |
| 214 | | LOT DOVETAILS |
| 215 | | LOT OF REGROUND END MILLS |
| 216 | | LOT OF DRILL BITS |
| 217 | | LOT OF TAPS, MILLING CUTTERS, END MILLS & REAMERS |
| 218 | | LOT OF REAMERS & BITS |
| 219 | | LOT OF NUMBER DRILL BITS |
| 220 | | LOT OF FRACTIONAL DRILL BITS |
| 221 | | LOT OF LETTER DRILLS |
| 222 | | LOT OF LATHE INSERTS |
| 223 | | LOT OF LATHE INSERTS |
| 224 | 43 | LARGE LATHE TOOL HOLDERS |
| 225 | 49 | SMALL LATHE TOOL HOLDERS |
| 226 | | LOT OF TAPS & DIES |
| 227 | | LOT OF PLUG THREAD GAGES |
| 228 | | LOT OF RING THREAD GAGES & MISCELLANEOUS IN (3) DRAWERS |
| 229 | | MACHINE PARTS, BEARINGS, BELTS, FANS, CHAIN, & MISC IN (5) DRAWERS |
| 230 | | LISTA 6-DRAWER MACHINIST CART/CABINET |
| 231 | | LISTA 13-DRAWER MACHINIST CABINET |
| 232 | | LISTA 8-DRAWER MACHINIST CABINET |
| 233 | | LISTA 8-DRAWER MACHINIST CABINET |
| 234 | 5 | KURT MACHINE VISES |
| 235 | 5 | KURT MACHINE VISES |
| 236 | 5 | KURT MACHINE VISES |
| 237 | 5 | KURT MACHINE VISES |
| 238 | 5 | KURT MACHINE VISES |
| 239 | 5 | KURT MACHINE VISES |
| 240 | 5 | KURT MACHINE VISES |
| 241 | 3 | KURT MACHINE VISES |
| 242 | 3 | KURT MACHINE VISES |
| 243 | 3 | KURT MACHINE VISES |
| 244 | 3 | MACHINE VISES |
| 245 | 2 | KURT MACHINE VISES |
| 246 | | INTERSTATE MACHINE VISE |
| 247 | 2 | MACHINE VISES |
| 248 | 2 | BRIDGEPORT MACHINE VISES |
| 249 | | KURT MACHINE VISE |
| 250 | | MACHINE VISE |
| 251 | 2 | KURT MACHINE VISES |
| 252 | | LOT OF HOLD DOWNS |
| 253 | 2 | T-SLOTTED ADJUSTABLE ANGLE PLATES: 8x10 |
| 254 | 5 | ASSORTED ANGLE PLATES |
| 255 | | HARIGE TRU-DEX WHEEL DRESSER |
| 256 | | PHASE II END MILL CUTTER SHARPENER 235-004 |
| 257 | 2 | PHASE II INDEX FIXTURES |
| 258 | | KEYWAY AND HOLE BROACHES |
| 259 | | METAL FRAME WORK BENCH: 3'x5'x33"H |
| 260 | 2 | WOOD WORK BENCHES ON CASTERS: 4'x7'x3'H |
| 261 | 3 | ASSORTED METAL FRAME WORK BENCHES |
| 262 | | METAL FRAME WORK BENCH: 12'x49"x35"H |
| 263 | 2 | SHOP CARTS |
| 264 | 2 | SHOP CARTS |
| 265 | 2 | SHOP CARTS |
| 266 | 3 | SHOP CARTS |
| 267 | 2 | SHOP CARTS |
| 268 | | JAMCO 3-TIER SHOP CART |
| 269 | | HUSKY 4-DRAWER TOOL CABINET |
| 270 | | MAN-LIFT SAFETY CAGE |
| 271 | | SAVAGE RANGE SYSTEMS MODEL: GD |
| 272 | | BROWN & SHARPE CCM MODEL: N, S/N: 0297/1063 |
| 273 | | SUBURBAN TOOL MASTER VIEW OPTICAL COMPARATOR W/ FAGOR NVP 200 QCF-RS DRO |
| 274 | | ROCKWELL HR-150A HARDNESS TESTER |
| 275 | | MITUTOYO NUMBER 192-112 18" HEIGHT GAGE |
| 276 | | MITUTOYO 18" HEIGHT GAGE |
| 277 | | LOT OF VERMONT GAGE PIN GAGES AND FOWLER BAR GAGES |
| 278 | | GRANITE SURFACE PLATE 2'x3'x6" WITH STAND |
| 279 | | GRANITE SURFACE PLATE 2'x3'x4" WITH STAND |
| 280 | | GRANITE SURFACE PLATE 2'x3'x4" WITH STAND |
| 281 | | GRANITE SURFACE PLATE 2'x3'x4" WITH STAND |
| 282 | | GRANITE SURFACE PLATE 18"x12"x3" |
| 283 | | GRANITE SURFACE PLATE 18"x12"x4" |
| 284 | 2 | GRANITE SURFACE PLATES, 12"x9"x2" & 6"x12"x2" |
| 285 | | GRANITE SURFACE PLATE 6"x6"x2" WITH DIAL GAGE |
| 286 | | RAYTECH TUMBLER |
| 287 | | SHIM STOCK, PIN GAGES & MISCELLANEOUS ON BENCH |
| 288 | 9 | GUN DRILLS |
| 289 | | TAPMATIC 70X REVERSABLE TAPPING ATTACHMENT |
| 290 | 13 | COLLETS |
| 291 | 43 | 16C COLLETS |
| 292 | 75 | ASSORTED SIZE COLLETS |
| 293 | 78 | ASSORTED SIZE COLLETS |
| 294 | 26 | ASSORTED SIZE COLLETS |
| 295 | 58 | ASSORTED SIZE COLLETS |
| 296 | | LOT OF SET-UP & V-BLOCKS |
| 297 | | ULTRA MATIC TUMBLER |
| 298 | | 1988 MSC LF-BS12A HORIZONTAL BAND SAW, S/N: 801B002 |
| 299 | | LOT OF STEEL STOCK |
| 300 | | STEEL STOCK RACK AND CONTENTS |
| 301 | 8 | STEEL STOCK: 12'x1.559", TYPE: 4142 |
| 302 | | LOUISVILLE 14' STEP LADDER |
| 303 | | 2010 NIKON K-SERIES OPTICAL CMM W/ K600 CAMERA, SPACE PROBE, CONTROL UNIT, S/N: K6C-12245 |
| 304 | | LOT OF LATHE INSERTS |
| 305 | | ASSORTED DRILL BITS & REAMERS IN (2) BINS |
| 306 | 2 | LOT OF ASSORTED GAUGES |
| 307 | | LOT OF HOLD DOWNS |
| 308 | | PHASE II COLLET INDEXER AND MISCELLANEOUS |
| 309 | | YUASA 3-JAW CHUCK |
| 310 | | AUTO-STRONG 3-JAW CHUCK |
| 311 | | YUASA 3-JAW CHUCK |
| 312 | | YUASA 585-108N 3-JAW CHUCK |
| 313 | | CUSHMAN 3-JAW CHUCK |
| 314 | | HUA-PAI 4-JAW CHUCK |
| 315 | | 3-JAW CHUCK |
| 316 | | 3-JAW CHUCK WITH (2) FACE PLATES |
| 317 | 2 | 3-JAW CHUCKS |
| 318 | 4 | MACHINE TOOL BOXES |
| 319 | 4 | MACHINE TOOL BOXES |
| 320 | | LOT OF ASSORTED TOOLS IN (3) BOXES |
| 321 | | LOT OF ASSORTED TOOLS IN (3) BINS |
| 322 | | METAL FRAME BENCH WITH SKIL BENCH GRINDER AND RIDGID VAC |
| 323 | | METAL FRAME BENCH WITH SKIL BENCH GRINDER AND SHOP VAC |
| 324 | | METAL FRAME BENCHES WITH SKIL BENCH GRINDER AND RIDGID VAC |
| 325 | | DONALDSON CFS1500 DUST COLLECTOR |
| 326 | 2 | TOMBSTONE PLATE BASES |
| 327 | 6 | ASSORTED ABBOTT ALUMINUM PIE JAWS |
| 328 | 5 | ALUMINUM PIE JAWS |
| 329 | 11 | CHUCK JAWS |
| 330 | 14 | CHUCK JAWS |
| 331 | 10 | CHUCK JAWS |
| 332 | | MISCELLANEOUS LOT UNDER (2) BENCHES |
| 333 | 9 | ASSORTED TOOLING HOLDERS |
| 334 | 12 | ASSORTED TOOLING HOLDERS |
| 335 | 6 | ASSORTED TOOLING HOLDERS |
| 336 | 5 | ASSORTED TOOLING HOLDERS |
| 337 | 7 | ASSORTED TOOLING HOLDERS |
| 338 | | LOT OF MACHINE TOOLING |
| 339 | 20 | ASSORTED LATHE TOOL HOLDERS |
| 340 | | LOT OF TOOL HOLDERS |
| 341 | | LOT OF TOOL HOLDERS |
| 342 | | ASSORTED TOOLING IN (3) BINS |
| 343 | | LOT OF (16) DRILL BITS, DRILL CHUCKS AND MISCELLANEOUS |
| 344 | 2 | MOVEABLE LATHE CENTERS |
| 345 | 2 | LATHE CENTERS |
| 346 | 3 | LATHE CENTERS |
| 347 | | DRILL BITS AND MISCELLANEOUS IN (4) BINS |
| 348 | 2 | SPI CYLINDER GAUGES |
| 349 | 2 | MITUTOYO 511 SERIES CYLINDER GAUGES |
| 350 | | MISCELLANEOUS LOT |
| 351 | | MACHINE PUMPS AND MOTORS UNDER BENCH |
| 352 | | ANGLE PLATE, HOLD DOWNS UNDER BENCH |
| 353 | | LOT OF (4) HOSES AND REGULATORS |
| 354 | | BIG BEAR TOOL HOLDER CART |
| 355 | | HUOT TOOL HOLDER CART |
| 356 | | TOOL HOLDER CART |
| 357 | | TOOL HOLDER CART |
| 358 | 10 | TOOL HOLDERS WITH TOOLING |
| 359 | 8 | TOOL HOLDERS WITH TOOLING |
| 360 | 20 | ASSORTED TOOL HOLDERS |
| 361 | 24 | ASSORTED TOOL HOLDERS |
| 362 | 24 | ASSORTED TOOL HOLDERS |
| 363 | 24 | ASSORTED TOOL HOLDERS |
| 364 | 24 | ASSORTED TOOL HOLDERS |
| 365 | 24 | ASSORTED TOOL HOLDERS |
| 366 | 24 | ASSORTED TOOL HOLDERS |
| 367 | 24 | ASSORTED TOOL HOLDERS |
| 368 | 24 | ASSORTED TOOL HOLDERS |
| 369 | 24 | ASSORTED TOOL HOLDERS |
| 370 | 24 | ASSORTED TOOL HOLDERS |
| 371 | 24 | ASSORTED TOOL HOLDERS |
| 372 | 24 | ASSORTED TOOL HOLDERS |
| 373 | 24 | ASSORTED TOOL HOLDERS |
| 374 | 24 | ASSORTED TOOL HOLDERS |
| 375 | 24 | ASSORTED TOOL HOLDERS |
| 376 | 24 | ASSORTED TOOL HOLDERS |
| 377 | 24 | ASSORTED TOOL HOLDERS |
| 378 | 18 | ASSORTED TOOL HOLDERS |
| 379 | 24 | ASSORTED TOOL HOLDERS |
| 380 | 24 | ASSORTED TOOL HOLDERS |
| 381 | 24 | ASSORTED TOOL HOLDERS |
| 382 | 24 | ASSORTED TOOL HOLDERS |
| 383 | 24 | ASSORTED TOOL HOLDERS |
| 384 | 24 | ASSORTED TOOL HOLDERS |
| 385 | 24 | ASSORTED TOOL HOLDERS |
| 386 | 24 | ASSORTED TOOL HOLDERS |
| 387 | 24 | ASSORTED TOOL HOLDERS |
| 388 | 24 | ASSORTED TOOL HOLDERS |
| 389 | 24 | ASSORTED TOOL HOLDERS |
| 390 | 24 | ASSORTED TOOL HOLDERS |
| 391 | 24 | ASSORTED TOOL HOLDERS |
| 392 | 24 | ASSORTED TOOL HOLDERS |
| 393 | 24 | ASSORTED TOOL HOLDERS |
| 394 | 24 | ASSORTED TOOL HOLDERS |
| 395 | 24 | ASSORTED TOOL HOLDERS |
| 396 | 24 | ASSORTED TOOL HOLDERS |
| 397 | 24 | ASSORTED TOOL HOLDERS |
| 398 | 24 | ASSORTED TOOL HOLDERS |
| 399 | 24 | ASSORTED TOOL HOLDERS |
| 400 | 24 | ASSORTED TOOL HOLDERS |
| 401 | 24 | ASSORTED TOOL HOLDERS |
| 402 | 24 | ASSORTED TOOL HOLDERS |
| 403 | 24 | ASSORTED TOOL HOLDERS |
| 403A | 24 | ASSORTED TOOL HOLDERS |
| 403B | 21 | ASSORTED TOOL HOLDERS |
| 404 | 32 | BT35 TOOL HOLDERS WITH STAND |
| 405 | 28 | C40 TOOL HOLDERS WITH STAND |
| 406 | 3 | ASSORTED SIZE METAL FRAME WORK BENCHES |
| 407 | 3 | METAL FRAME WORK BENCHES: 6'x32"x40"H |
| 408 | 2 | METAL FRAME WORK BENCHES: 6'x32"x40" & 42"H |
| 409 | 2 | METAL FRAME WORK BENCHES: 6'x32"x40"H |
| 410 | 2 | ASSORTED SIZE METAL FRAME WORK BENCHES |
| 411 | 2 | ASSORTED SIZE METAL FRAME WORK BENCHES |
| 412 | 2 | METAL FRAME BENCHES: 5'x3'x33"H |
| 413 | 78 | BARS OF 4140 13'x1/2" STEEL |
| 414 | | MACHINE TOMBSTONE |
| 415 | | MACHINE TOMBSTONE |
| 416 | | LEAVE TOMBSTONE |
| 417 | | LEAVE TOMBSTONE |
| 418 | | MACHINE TOMBSTONE |
| 419 | | LEAVE TOMBSTONE PALLET |
| 420 | | MACHINE TOMBSTONE |
| 421 | | MACHINE ANGLE PLATE |
| 422 | 2 | KIWA KH45 PALLETS AND ACCESSORIES |
| 423 | | MACHINE PALLET |
| 424 | | ANGLE PLATE |
| 425 | | 4815 BOTTOM PLATES |
| 426 | | MK19 TOP COVER SETUP BOX |
| 427 | | LOT OF CUSTOM MACHINE TOOLING & FIXTURES IN 54 BOXES |
| 428 | | (2) PALLETS OF MACHINE TOOLING & FIXTURES |
| 429 | | BRIDGEPORT SHAPING ATTACHMENT |
| 430 | | CONTROL UNIT AND PROBE |
| 431 | 121 | PARTS BINS |
| 432 | 425 | ASSORTED SIZE PARTS BINS |
| 433 | | 2004 CUTLER HAMMER POW-R-WAY 3, 600 AMP 4-WIRE, 3PH STYLE SAD42866 |
| 434 | | LOT OF ROTARY TABLES AND ANGLE PLATES |
| 435 | | MISCELLANEOUS MACHINE PARTS ON PALLET |
| 436 | | MISCELLANEOUS MACHINE PARTS ON PALLET |
| 437 | | FLUID PANS AND SCREENS ON PALLET |
| 438 | | LOT OF 4" PVC SLEEVES IN (5) BOXES |
| 439 | | 4-JAW CHUCK AND 22" ROTARY FACE PLATE |
| 440 | 2 | AERCOLOGY EA900 BLOWERS |
| 441 | 4 | PALLETS OF ASSORTED MACHINE FIXTURES |
| 442 | | LOT OF (7) BOXES OF ASSORTED MACHINE FIXTURES |
| 443 | | LOT OF PALLET RACKING |
| 444 | | HYUNDAI KIA SKT21 PARTS MACHINE |
| 445 | | KELLER PRODUCTS MODEL: 457 FILTRATION PUMP |
| 446 | 2 | YUASA DMNC-5C01 & UDX-131-60 INDEXERS |
| 447 | | LOT OF JOHNFORD TOOLING |
| 448 | | LOT OF (1000) EJECTION PORT COVERS |
| 449 | | LOT OF ALUMINUM SCRAP |
| 450 | | LOT OF THREAD PLUG GAGES |
| 451 | | LOT OF RING GAGES |
| 452 | | LOT OF THREAD PLUG GAGES |
| 453 | | LOT OF MACHINE FIXTURES |
| 454 | | ASSORTED STOOLS AND CHAIRS |
| 455 | | (2) CHIP BINS, FLUID PANS AND LUBRICANTS |
| 456 | 6 | LATHE TOOLING BITS |
| 457 | | LOT OF (22) LATHE TOOLING HOLDERS WITH CYLINDRICAL SHANKS |
| 458 | 5 | EVERMORE BR40 LATHE TOOLING HOLDERS |
| 459 | | LOT OF JAW CHUCKS AND LATHE TOOLING |
| 460 | | METAL WORK BENCH: 52"x22"x36"H |
| 461 | | ASSORTED LATHE TOOLING ON (2) RACKS |
| 462 | | (4) CHUCKS AND ASSORTED TOOLING |
| 463 | 2 | MACHINE PALLETS |
| 464 | | LOT OF ASSORTED BITS |
| 465 | | LOT OF ASSORTED BITS AND CARBIDE INSERTS |
| 466 | | LOT OF ASSORTED BITS |
| 467 | | LOT OF ASSORTED BITS |
| 468 | | LOT OF ASSORTED BITS |
| 469 | | LOT OF ASSORTED BITS |
| 470 | | LOT OF (18) COLLETS |
| 471 | | LOT OF ASSORTED BITS |
| 472 | | SAFETY GLASSES AND KIT |
| 473 | | GBC COMBIND C110 BINDER AND LAMINATOR |
| 474 | | MICROWAVE, FILE, LAMP AND MISCELLANEOUS |
| 475 | | LOT OF OFFICE SUPPLIES |
| 476 | | PALLET OF STEEL STOCK |
| 481 | | 2008 BROWN & SHARPE MICRO-HITE DCC 454, S/N: 0812-0056 |
| 482 | | SUBURBAN TOOL MASTERVIEW MV140SE S/N 1013-0311F |
| 483 | | MARK-10 HEIGHT GAGE |
| 484 | | TESA-HITE 400 HEIGHT GAGE |
| 485 | | TESA-HITE 600 HEIGHT GAGE |
| 486 | | SPI HEIGHT GAGE |
| 487 | | MITUTOYO DIGITAL HEIGHT GAGE 192-631-10 |
| 488 | | MITUTOYO DIGITAL HEIGHT GAGE 192-112 |
| 489 | | STARRETT DIGICHEK HEIGHT GAGE |
| 490 | | TESA 6.3500MM CALIBRATOR |
| 491 | | HELIOS HEIGHT GAGE |
| 492 | 4 | SPI DIAL CALIPER GAGES |
| 493 | 3 | DIAL BORE GAGES |
| 494 | 4 | MITUTOYO DIAL BORE GAGES: .7-1.4, 1.4-2.5, .7-1.5, 2-4 |
| 495 | 2 | MITUTOYO DIAL BORE GAGES: .7-1.4, 2-6 |
| 496 | 2 | MITUTOYO DIAL BORE GAGES: .7-1.4, 2-6 |
| 497 | 2 | MITUTOYO DIAL BORE GAGES: 2-4, 4-6.5 |
| 498 | | HAWKEYE BORESCOPE STREAM LIGHT STRION |
| 499 | | STARRETT MICROMETER SET |
| 500 | 4 | MITUTOYO MICROMETERS |
| 501 | 2 | MAGNETIC BASES |
| 502 | 2 | MAGNETIC BASES |
| 503 | 2 | MAGNETIC BASES |
| 504 | | 1984 ROCK OF AGES SURFACE PLATE: 8'x4'x14"H |
| 505 | | PRIMELINE INTERNATIONAL 40" VERNIER CALIPER |
| 506 | | MITUTOYO 18" VERNIER CALIPER |
| 507 | 3 | ASSORTED CALIPERS |
| 508 | 3 | FOWLER 6" CALIPERS |
| 509 | 3 | ASSORTED STANDARDS |
| 510 | | MITUTOYO INSIDE MIC SET |
| 511 | 3 | INDICATING MICROMETERS |
| 512 | 3 | ASSORTED MICROMETERS |
| 513 | 3 | ASSORTED MICROMETERS |
| 514 | 3 | PORTABLE REFRACTOMETERS |
| 515 | 4 | SETS OF BAR GAGES |
| 516 | 2 | VERMONT GAGE PIN GAGE SETS: .0610-.2500 & .2510-.5000 |
| 517 | | ASSORTED TEST EQUIPMENT |
| 518 | 7 | BLOCK STANDS |
| 519 | | ASSORTED PLUG & RING GAGES |
| 520 | | BROWN & SHARPE POCKET SURF PORTABLE GAGE |
| 521 | | LOT OF (11) ASSORTED DIAL GAGES |
| 522 | | LOT OF GAGE BALLS |
| 523 | | LOT OF (23) ASSORTED V-BLOCKS |
| 524 | 43 | THREADED PIN GAGES |
| 525 | | LOT OF ASSORTED TOOLING AND PLATES |
| 526 | | RADIUS GAGES AND VARIOUS INSTRUMENTS |
| 527 | | LOT OF ASSORTED MACHINE FIXTURES |
| 528 | | METAL TWO-DOOR STORAGE CABINET |
| 529 | | METAL TWO-DOOR STORAGE CABINET |
| 530 | | METAL TWO-DOOR STORAGE CABINET |
| 531 | | METAL 5-SHELF STORAGE RACK |
| 532 | 2 | VERMONT GAGE PIN GAGE SETS: .0610-.2500 & .2510-.5000 |
| 533 | 2 | VERMONT GAGE PIN GAGE SETS: .0610-.2500 & .2510-.5000 |
| 534 | 2 | VERMONT GAGE PIN GAGE SETS: .0610-.2500 & .2510-.5000 |
| 535 | 2 | VERMONT GAGE PIN GAGE SETS: .0610-.2500 & .2510-.5000 |
| 536 | 3 | VERMONT GAGE PIN GAGE SETS: .061-.250, 5.01-9.99 & .626-.750 |
| 537 | 5 | ASSORTED PIN GAGE SETS |
| 538 | | LOT OF ASSORTED PIN GAGES |
| 539 | | LOT OF ASSORTED PIN GAGES |
| 540 | | LOT OF ASSORTED PIN GAGES |
| 541 | 2 | ANGLE PLATS |
| 542 | 2 | ANTI-FATIGUE MATS |
| 543 | | HP PAVILION a6813w CPU WITH ACER V193 MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 544 | | HP p6243w CPU WITH HP 2009m MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 545 | | HP PAVILION p7-1235 CPU WITH HP 2159m MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 546 | | DELL STUDIO CPU WITH CELL E176 MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 547 | | ASUS CM1630 CPU WITH PROVIEW 500P MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 548 | | HP PAVILION s5-1554 CPU WITH DELL SE197 MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 549 | | DELL OPTIPLEX 755 CPU WITH DELL IN2030MC MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 550 | | COMPAQ CZ2014 & DELL OPTIPLEX 320 CPUs WITH ACER P236H MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 551 | | DELL DIMENSION 5150 CPU WITH DELL E176 MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 552 | | DELL DIMENSION 5150 CPU WITH DELL E177 MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 553 | | DELL DIMENSION 5150 CPU WITH DELL ST2010f MONITOR (HARD DRIVES WIPED, NO OPERATING SYSTEM) |
| 554 | 6 | ASSORTED BATTERY BACK-UPS |
| 555 | | KENMORE COMPACT REFRIGERATOR AND TOASTER |
