2004 Chevrolet Silverado 4wd Pickup
2001 Peterbilt 330 w/ Palfinger PK13000 Crane
2001 Peterbilt 330 S/A tractor
2001 Kenworth T800 w/ Palfinger PK19000 Crane
2005 JCB 940 Forklift
Toyota 7FGU25 Forklift
Toyota 7FGU25 Forklift
Toyota 5FGC15 Forklift
Clark 16,000lb Forklift
1972 Cat 920 Wheel Loader
Truss Trailer
5-strand lumber infeed deck 30ft. x 12ft
6-strand lumber transfer deck
2004 Mitek Cyber A/T Component Saw
TTS Auto Stacker
Metra-Cut SSA-5
Dustek Dust Collector
(1) of (7) Virtek Alignment Lasers
1997 Mitek 68000 Rail Rider Gantry Press
Klaisler 214H Finish Roller
Truss Unloader
2000 Mitek Rail Rider 5ft.2in 81680-501
10ft. Finish Roller
2001 Mitek Rail Rider End Eject 82100-507
2000 A.R.E Challenger Grinder
Holtec Bunk Saw
Whirlwind 1000R Up-Cut Saw
Mitek Easy-Set Component Saw
Monopress C-Clamp Truss Truss
Triad Wall Framing Table
Cantilever Lumber Storage
Engineered Beams
Finger Jointed lumber
MSR pine Lumber
Clean Burn CB1400 waste oil furnace
Niagara No. 962 Shear
5ft x 5ft Acorn Table
Makita 2.5hp air compressor
Parts Bins
Wright Self-Dumping Hopper
30ft. Steel I-Beams
More images...
|
 |
Auction 11-202
Secured Party's sale at:
PUBLIC AUCTION 11-202
TRUSS MANUFACTURING & SUPPORT EQUIPMENT - FORKLIFTS - TRUSS TRAILERS - HOPPER GRINDER - SHOP & OFFICE EQUIPMENT
RE: SPROWL BUILDING COMPONENTS, INC.
THURSDAY, SEPTEMBER 22, 2011 AT 10AM
22 MAIN ST. N., SEARSMONT, ME.
PREVIEW: Wednesday, September 21, 2011 from 10AM - 3PM
TRUCKS
- 2000 Kenworth T800 tandem axle tractor, Caterpillar C-12 430hp diesel, RTO16908LL trans, 4.11 axle ratio, dbbl diff lock, 385/65R22.5 front tires, 11R22.5 rear tires, aluminum rims, 14,600 fronts, 40,000 rears, aluminum tool boxes, 450,785 miles, w/ 1999 Palfinger Model PK19000 knuckleboom crane w/ remote control.
- 2001 Peterbilt single axle tractor, Caterpillar 3126 diesel, Eaton AutoShift, 12,000 fronts, 21,000 rear, cruise, a/c, heated power mirrors 295/75R22.5 tires on aluminum rims, aluminum tool boxes, diff lock, 306,158 miles, w/ 1998 Palfinger Model PK130000 knuckleboom crane.
- 2001 Peterbilt single axle tractor, Caterpillar 3126 diesel, Eaton AutoShift, 12,000 fronts, 21,000 rear, cruise, a/c, heated power mirrors 295/75R22.5 tires on aluminum rims, aluminum tool boxes, diff lock, 268,132 miles.
- 2004 Chevrolet Silverado 4wd regular cab pickup, 4.3L V6, automatic, a/c.
FORKLIFTS & CAT WHEEL LOADER
- 2005 JCB 940 RTFL 8,000LB. ROUGH TERRAIN FORKLIFT, S/S, 3-STAGE MAST, 30', ENCLOSED CAB, PERKINS DIESEL, S/N: SLP940045E0824282
- 2000 TOYOTA 7FGU25, 5,000LB FORKLIFT, S/S, 189" 3-STAGE MAST, LP GAS, PNEUMATIC TIRES 5,688 HRS, S/N: 62920
- 2004 TOYOTA 7FGU25, 5,000LB FORKLIFT, S/S, 189" 3-STAGE MAST, LP GAS, PNEUNATIC TIRES 2,916 HRS, S/N: 71722
- 1995 TOYOTA 5FGC15, 3,000LB. FORKLIFT, 185" 3-STAGE MAST S/S, 11,910 HRS., S/N: 74285
- CLARK 16,000LB. FORKLIFT, DETROIT DIESEL, 11' 2-STAGE MAST, BALL-O-MATIC MDL. 1769510 100" CARRIAGE, 55" X 8" TINES
- 1972 CATERPILLAR 920 WHEEL LOADER, BALDERSON QUICK COUPLER, BUCKET, FORK TINE ATTACHMENT, S/N: 62K3823
ROOF TRUSS SHOP
- 21' X 12' & 9' X 12', 5-STRAND LUMBER INFEED DECKS, 3HP, 3PH DRIVES
- 2004 MITEK CYBERSAW A/T, AUTOMATED COMPONENT SAW, 3PH, CONTROLS, W/ JET-A-MARK DOD-8400 INKJET PRINTER
- 13' X 2' INCLINE BELT CONVEYOR, DRIVE
- 1988 JAGER INDUSTRIES TTS AUTO STACKER, 440/3PH, S/N: HB527
- 12' X 4' INCLINE SKATE CONVEYOR TABLE
- SPEED CUT METRA-CUT SSA-5 RADIAL ARM SAW, S/N: J1116, 5' & 20' ROLLER FEED TABLES
- 1995 DUSTEK 4-BAG DUST COLLECTOR, 10HP
- SIMPLEC MFG. CO. WHIRLWIND 1000R PNEUMATIC UP-CUT SAW, S/N: 788793R
- 1997 MITEK 68000 ROOF GANTRY PRESS, 14'W X 103' WORK AREA, SIDE EJECT
- (7) VIRTEK LASER ALIGNMENT HEADS
- (28) 14'W X 5" DIA. OUTFEED ROLLS W/ DRIVES (INSIDE)
- KLAISLER 214H FINISH ROLLER, S/N: 1596
- (25) 14'W X 5" DIA. OUTFEED ROLLS W/ DRIVES (OUTSIDE)
- (2) 4-ARM TRUSS UNLOADER W/ STOP & ASSOCIATED DRIVES
- 62" GANTRY PRESS
- 2000 HOLTEC TRANSCUT II PORTABLE BUNK SAW, 3PH, S/N: 00067
FLOOR TRUSS SHOP
- 7' X 12' INCLINE SKATE CONVEYOR TABLE
- 13' X 12'W 6-STRAND LUMBER TRANSFER DECK W/ 2HP DRIVE, 3PH
- 2000 MITEK RAIL RIDER 5'2" GANTRY PRESS, 81680-501, SIDE-EJECT, 3PH, 52' X 62" TABLE
- (2) 13' X 80" OUTFEED, 5-ROLL & (1) 16' X 80" OUTFEED, 11-ROLL
- 10' FINISH ROLLER
- (2) 16' X 6' ROLL OUTFEEDS, 11 & 6-ROLL & (1) 25' X 6' OUTFEED, 9-ROLL (2) TRUSS RACKS
- 2001 MITEK RAILRIDER FLOOR TRUSS, 82100-507 END EJECT, 3PH, 54' X 82" TABLE
- (11) 4' X 5" DIA., ROLL OUTFEEDS W/ (2) TRUSS RACKS
- MILWAUKEE HD PANEL SAW CAT NO. 6480-20 W/ 3.25HP POWER UNIT
- MAKITA COMPOUND MITER SAW, LS1212
- DEWALT DW708 SLIDING COMPOUND MITER SAW
- (2) 10' X 2' ROLLER TABLES
COMPONENT SAW & WALL FRAMING EQUIPMENT SHOP
- 1995 MITEK EASY-SET MDL. 70000000/4000 COMPONENT SAW, S/N: 4018
- (2) WASTE BOXES
- JUSTRITE 12-GALLON FLAMMABLE STORAGE CABINET
- TOOL BOX & PARTS SHELVING
- (6) TRUSSES, 20-05-G
- (2) HYDRO-AIR MONOPRESS C-CLAMPS, W/ PEDESTAL JIB & TABLES
- CARLSON SYSTEMS NAILING MACHINE
- TRIAD 24' X 8' WALL FRAMING TABLE W/ WINDOW/DOOR TABLE
- TRIAD 16' X 8' WALL FRAMING TABLE W/ WINDOW/DOOR TABLE
- CARLSON SYSTEMS D135B WALL FRAMING TABLE, 24' X 8', S/N: 41810
- MILWAUKEE 8" PANEL SAW, CAT. NO. 6480
- DEWALT RADIAL ARM SAW W/ ROLLER FEEDS
- MAKITA SLIDING COMPOUND MITER SAW
HOPPER GRINDER
- 2000 A.R.E. CHALLENGER HOPPER STYLE GRINDER, CG30020305 W/ 11' AUGER TAKE-AWAY CONVEYOR
AIR COMPRESSORS
- QUINCY QTSV45 5HP AIR COMPRESSOR
- QUINCY QT-7.5 QT75ST7HP00320 3PH AIR COMPRESSOR
- QUINCY 5HP, 3PH, VERTICAL AIR COMPRESSOR
- INGERSOLL-RAND 10TD 10HP AIR COMPRESSOR, 3PH
- AIR TAK REFRIGERATED AIR DRIER
- HANKISON AIR DRIER
- MAKITA MAC2400 AIR COMPRESSOR, 2.5HP
TRUSS TRAILERS - TRUCK
- 2000 J.D.H. TRUSSMASTER TRAILER, T/A, 48' X 102", GVWR: 68,000, 255/70R22.5, 21-ROLL
- 1989 36' X 100" HOMEMADE FLATBED TRUSS TRAILER, S/A,12-ROLLER
- 1987 31' X 102" HOMEMADE FLATBED TRUSS TRAILER, S/A,12-ROLLER
- 1987 HOMEMADE TRUSS TRAILER, 49' X 102", 16-ROLLS, T/A
- 1983 HOMEMADE FLATBED TRAILER, 42' X 96", T/A
- 1968 DORSEY 45' X 96" TRUSS TRAILER, T/A, 16' SECTION & 29' SECTION
- 1988 HOMEMADE EQUIPMENT TRAILER, 9.5' GOOSENECK, 22' DECK, 4' BEAVER TAIL, 102"W S/A, 5-RATCHET TIE DOWNS, HOLLAND LANDING GEAR
- 1950 30.5' X 96" TRUSS TRAILER, S/A
- 1987 GMC SIERRA 4WD W/ SANDER BODY
- 1985 CHEVROLET CUSTOM DELUXE STEP SIDE PICKUP, V8, AUTO, MANUAL, 84,209 MI.
- 1984 CHEVROLET CUSTOM DELUXE 2WD REG CAB PICKUP, V6, MANUAL, 51,531 MI.
- 1977 GMC SIERRA 4WD REG CAB PICKUP TRUCK W/ FISHER PLOW, 53,476 MI.
STORAGE RACKING, JERSEY BARRIERS & MATERIAL HANDLING EQUIPMENT
- CANTILEVER 2-SIDED LUMBER STORAGE RACK, 120'L X 20'H X 9'W, 4-SHELF
- (24) SECTIONS OF PALLET RACKING, 12'h X 42"d X 9'w, 33-UPRIGHTS, 100-BEAMS
- (43) STACKABLE LUMBER RACKS
- (49) LUMBER CARTS
- (18) JERSEY BARRIERS, 10'
- (10) JERSEY BARRIERS, 12'
- (48) JERSEY BARRIERS, 8'
- (2) LP TANK CAGES
- (41) STEEL STACK RACKS
- (76) STEEL TRUSS RACKS
- (3) TRUSS WAGONS
- (7) ASSORTED STEEL LUMBER RACKS
- LIFTRITE 5,000LB. HYDRAULIC PALLET JACK
(6) WRIGHT SELF-DUMPING HOPPERS 1.5-YARD
(7) SIGNODE DT1-10RW STRAPPING CARTS
(19) ROLLS OF 5/8"x.035"x4200' (16x6-IDxFace) POLYESTER STRAPPING
- STEEL & NYLON BANDING
- CORDLESS BANDING TOOL
LUMBER & STEEL INVENTORY
- LIFT OF 2" X 4" X 10' LUMBER
- LIFT OF 2" X 4" X 12' LUMBER
- LIFT OF 2" X 4" X 14' LUMBER
- (2) LIFTS OF 2" X 4" X 16' LUMBER
- (2) LIFTS OF 2" X 6" X 10' LUMBER
- (3) LIFT OF 2" X 6" X 12' LUMBER
- LIFT OF 2" X 6" X 16' LUMBER
- (10) TRUSSES
- (16) TRUSSES, 28-06-T
- (11) TRUSSES, 28-06-56
- (189) 2" X 6" X 10' KD, SPF, MSR
- (189) 2" X 6" X 10' KD, SPF, MSR
- (189) 2" X 6" X 12' KD, SPF, MSR
- (189) 2" X 6" X 12' KD, SPF, MSR
- (189) 2" X 6" X 16' KD, SPF, MSR
- (189) 2" X 6" X 16' KD, SPF, MSR
- (189) 2" X 6" X 16' KD, SPF, MSR
- (189) 2" X 6" X 14' KD, SPF, MSR
- (189) 2" X 6" X 14' KD, SPF, MSR
- (189) 2" X 6" X 10' KD, SPF, MSR
- (189) 2" X 6" X 14' KD, SPF, MSR
- (189) 2" X 6" X 12' KD, SPF, MSR
- (294) 2" X 4" X 16' KD, SPF, MSR
- (294) 2" X 4" X 16' KD, SPF, MSR
- (294) 2" X 4" X 14' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 12' KD, SPF, MSR
- (294) 2" X 4" X 10' KD, SPF, MSR
- (3) LIFTS OF KD 2" X 4" X 108" FINGER JOINT STUDS
- (2)LIFTS OF KD 2" X 4" X 96" FINGER JOINT STUDS
- (7)LIFTS OF KD 2" X 4" X 10' FINGER JOINT STUDS
- (4)LIFTS OF 2" X 7" X 12' JOISTS
- LIFTS OF KD 2" X 4" X 96" FINGER JOINT STUDS
- (29) SHEETS OF ADVANTECH 4' X 8' SHEATHING
- (35) SHEETS OF CONSTRUCTION SHEATHING, 4' X 8' X 3/4"
- (44) SHEETS OF PLYWOOD, 4 X 8 X 1/2"
- MISCELLANEOUS DIMENSIONAL & SHEET LUMBER
- LUMBER LIFT
- LIFT OF 2" X 4" X 12' LUMBER
- (100) 2" X 10" X 14' SYP LUMBER
- (81) 2" X 10" X 12', 14' & 16' SYP LUMBER
- ASSORTED PT DIMENSIONAL LUMBER
- METAL ROOFING
- (60) 9" X 6" X 16' ENGINEERED BEAMS
- (6) 5" X 12" X 30' STEEL I-BEAMS
- (7) 21' X 4" DIA. STEEL PIPES
- LOT OF STEEL PLATE, 1/4" & 1/2"
- (11) PIECES OF 2' X 9' STEEL GRATING
SHOP TOOLS, PARTS ROOM & GARAGE EQUIPMENT
- CLEAN BURN CB1400 WASTE OIL FURNACE, AR-694340
- WASTE OIL TANK
- MANLEY 40-TON HYDRAULIC SHOP PRESS W/ ARBOR PRESS
- PORTABLE GANTRY
- 1906-1920 NIAGARA NO. 962 GEARED SHEAR, 62", 1/4" MILD STEEL CAP, S/N: 4161
- KALAMAZOO 9AW METAL BAND SAW, S/N: 7246
- 5' X 5' ACORN TABLE W/ VISE
- LINCOLN ARC WELDER, 250 AMP
- WELDING SCREEN & ACCESSORIES ON WALL
- CEILING MOUNTED AIR FILTER MACHINE
- LINDSAY SAND BLAST MACHINE
- CHICAGO PNEUMATICS 1' IMPACT WRENCH
- (17) WRENCHES
- HYDRAULIC C-CLAMP & HYDRAULIC POWER PACK
- (3) HYDRAULIC BOTTLE JACKS
- SPEEDY LIFT HYDRAULIC FLOOR JACK, 3.5-TON
- CRAFTSMAN HYDRAULIC FLOOR JACK, 3-TON
- BIG RED HYDRAULIC FLOOR JACK, 5-TON
- 35-TON AIR-OVER-HYDRAULIC FLOOR JACK
- 20-TON AIR-OVER-HYDRAULIC BOTTLE JACK
- (3) LUBE CARTS
- ALKOTA STEAM CLEANER, 2162
- CRAFTSMAN WET/DRY VAC, 6.5HP, 16-GAL.
- NAPA 85-107 FLEET CHARGER/BOOSTER
- (6) FLOOR CREEPERS
- JACK STANDS, STRAPS, RATCHETS, CHAIN
- MISCELLANEOUS TIRE TOOL LOT
- WHEEL DOLLY
- LYNN 12' FIBERGLASS STEP LADDER
- BARREL DOLLY
- MICRO PRECISION M-60 WHEEL BALANCER
- (2) LUBE REELS & LUBE GUNS
- LP GAS GENERATOR
- RIDGID PORTA-POWER THREADER
- (8) JACK STANDS
- 44-ASSORTED SIZE SOCKETS, 8-WHEEL SOCKETS, 30-ASSORTED TOOLS
- HYDRAULIC ENGINE HOIST
- TOLEDO PLATFORM SCALE, 811-A
- TIRE CAGE & TIRE ACCESSORIES
- SAFETY KLEEN PARTS WASHER
- 80-DRAWER WOODEN ROTO-BIN & CONTENTS
- HYDRAULIC HOSE SAW & ASSORTED HOSE
- 32', 4-SECTION BOLT BIN & CONTENTS
- LAWSON 80-BIM BOLT CABINET
- 61-ASSORTED SIZE U-BOLTS, 3-HOOKS
- 6-BRAKE DRUMS & MISCELLANEOUS ON WALL IN CORNER
- OIL SEALS & BEARINGS ON WALL
- WELDING ROD CABINET & ROD
- MISCELLANEOUS TAP-N-DIE TOOLS
- PARTS SHELVING, BINS & CABINETS
- YARDMAN 20" PUSH MOWER
- WALKER TURNER DRILL PRESS & 2-MACINE VISES
- BENCH GRINDER & SPARE WHEELS
- LOT OF STEEL STOCK & SCRAP
- WELDING WIRE & SAW BLADES
- TRUE TEMPER WHEEL BARREL
- (3) MASTER THERMOSTAT 150,000BTU SPACE HEATERS
- 30" MAGNET SWEEPER
- 10' ROLLING STOCK LADDER
- (33) WOODEN SAW HORSES
- HAND SHEAR
- DARRA JAMES TABLE SAW W/ EUROPA 340 FEED
- (40) 5-GALLON HOME DEPOT PAILS
- (4) 9 & 10-DOOR LOCKER UNITS
- PORTER-CABLE 75192 ROUTER
- (9) ASSORTED AIR NAILERS
- (5) MOTOROLA 2-WAY RADIOS
- HP COLOR LASERJET 2550
- AMANO PIX 55 TIME CLOCK W/ 2-CARD RACKS
- LOT OF GRUNDENS RAINWEAR
- (9) ASSORTED CIRCULAR SAW BLADES
- SAFETY HARNESS, IGLOO COOLERS & REMAINING CONTENTS
- 1-TON HOIST & STEEL GANTRY
- ACETYLENE CART
OFFICE FURNITURE & COMPUTER EQUIPMENT
- HOMACO SERVER RACK W/ PATCH PANELS & NET GEAR SWITCHES
- NORTEL STAR TALK TELEPHONE SYSTEM
- GESTNER 7800W BLUEPRINT COPIER
- HP DESIGNJET 250C PLOTTER
- HP COLOR LASERJET 5550DN
- HP DESIGNJET 500
- HP COLOR LASERJET 8500N
- HP LASERJET PRINTER 2550N
- DATAMAX I-CLASS LABEL PRINTER
- BROTHER INTELLIFAX 4100
- DELL POWER EDGE 2500 SERVER
- DELL POWER EDGE 2300 SERVER
- DELL DIMENSION 8100 & 8200 TOWERS W/ MONITOR & KEYBOARD
- (2) DELL DIMENSION 8250 TOWERS, DELL MONITOR
- (2) DELL DIMENSION 8400 TOWERS W/ DELL FLAT PANEL MONITOR
- (2) DELL DIMENSION 9200 TOWERS, & (2) DELL FLAT PANEL MONITORS
- GBC ULTIMA 65 LAMINATOR
- GBC SMART CUT S638 PRO
- GBC DOCUBIND P200 & SUPPLIES
- ROYAL SOVEREIGN LAMINATOR
- TOSHIBA TOP-S20 LCD PROJECTOR
- APOLLO PROJECTOR SCREEN
- (2) STEREO AMPLIFIERS, DVD/VHS PLAYER & (2) KLH SPEAKERS
- TRADE SHOW BOOTH
- (2) 2-DOOR METAL STORAGE CABINETS & CONTENTS
- (15) STORAGE RACKS
- WIRE STOCK CART
- (20) STACK ARM CHAIRS
- (6) METAL FOLDING CHAIRS
- HON 2 & 4-DRAWER LATERAL FILE CABINETS
- (2) COLOR TV'S-1 STAND & PAPER FILE
- (9) POLAROID INSTAMATIC CAMERAS
- REALISTIC CB RADIO
- (7) DIGITAL CAMERAS
- (20) MOTOROLA CELLULAR TELEPHONES
- (2) CD RADIO PLAYERS
- MAP FILE & STAND
- SENTRY 1380 SAFE
- 24-MAP HANGING FILE
- EPSON FLATBED SCANNER, ELECTRIC STAPLER, DYMO LABEL PRINTER
- CONFERENCE TABLE
- (3) L-SHAPED OFFICE DESKS
- (4) 2-DRAWER LATERAL FILE CABINETS
- 4-DRAWER LATERAL FILE CABINET
- DESK, (2) FOLDING TABLES, BOOKCASE, (2) STANDS
- ROYAL 15MX CROSSCUT SHREDDER
- (5) ASSORTED OFFICE CHAIRS
- (2) OIL FIRED ELECTRIC HEATERS
- MOP BUCKET & STEAM VAC
- (6) BATTERY BACKUPS
TERMS: Cash or Your Good Check. Out-of-state checks with Bank Letter of Guarantee. 10% Buyer’s Premium. All items sold for immediate removal. Visit Keenanauction.com for complete auction details, or contact Auctioneer at (207) 885-5100 & request Auction # 11-202. Richard J. Keenan #236. Our 39th Year & 5,811th Auction.
Terms & Conditions of Sale
|
